Step 1 · marker mats

Print the marker mats

Lay the mats under the car, stick a dot wherever the plumb bob lands and photograph them. The photo reader finds every dot to about a millimetre: no tape for each point.

Printer, plain paperMasking tapeRed and blue dot stickersPlumb bob, tapePhone camera

Download the PDF

15 pagesCard + datum A, B + 12 matsSingle-sided

US LetterA4Whole car at once? 24 mats: Letter · A4

What's in the pack

↑ FORWARD
Datum mats A and BA required · B optionalCross on the chalk-line crossing, arrow forward: this ties every photo to the car. B on a second point makes long layouts more accurate.
Mats 1 to 12Any way round12 unique markers each, so every photo knows which mat it sees. Dots go on the white.
Calibration card200 mm squareMeasure it. If the printer scaled the pages, the reader corrects for it.

Print them right

  • 100% / Actual size. Turn off “Fit to page” and “Shrink to fit”.
  • Measure the 200 mm check line on any mat. Not 200? Type the reading into the photo reader's “Check line reads” box.
  • Plain matte paper. Gloss glares in photos. Tape each mat flat at the corners.

Lay them out

front axle line (chalk)centreline (chalk)front bumper lipDatum AMat 1Mat 2Mat 3Mat 4Mat 5Mat 6
  1. Chalk lines: front axle (hub centre to hub centre) and centreline. How
  2. Datum A circle on the crossing, arms along the lines, arrow to the front.
  3. Chain the mats from datum A to the edge you trace, each touching the next. Under a bumper lip, follow the lip.
  4. Dots: plumb-bob every 2 in, red for the edge, blue under each mounting point.
  5. Photos from about 1 m up, phone flat. Two whole mats per photo; every mat shares a photo with a neighbour, back to datum A.

Then read the photos

The reader is on the measuring page. Try it with sample photos first: no printing needed.

Open the photo reader